|
1. PVC
House Wire (With Flexible Copper Conductor 650/1100 V.)
One
name in house wirees which inspires confidence in consultants, architects
and builders today is POLYCAB. One of the most sought-after brands
of house wires, Polycab has built up a requtation for commercial foresight
and solid integrity.
|
Polycab
house wires carry a guarantee that far exceeds the ISI Certification they
possess. Tested at every stage and supervised by experienced engineers,
Polycab house wire are making a name for themselves in both Indian and
world markets.
At Polycab, your safety is
of prime importance. Which is why the wires are twin-coated (upto 4 Sq. mm.)
to ensure superior insulation and increased electrical properties.
The adherence to stringent proces control has earned POLYCAB WIRES, the
approval of ISI, fIA & TAC. The solid Assurance, your house wires
could carry before carrying Electricity. |
2. PVC Flexible
Wires & Cables
POLYCAB
Brand, PVC insulated L.T. Light Duty Cables are as per IS:694-1990 and
are suitable for fixed wiring and flexible operation.
PVC House
Wires:-
"POLYCAB FIREBRAKE"
Flame Retardant Low Smoke (FRLS) PVC Insulated Wires for Building wiring
.
Copper
conductor PVC Insulated PVC Insulated wires are extensively used in residential
and commercial buildings for power distribution. They are used on metal/plastic
conduits either embedded in plaster ( Cconcealed wiring) or fixed on the
walls.
In
fifties, the use of electricity in household was limited to lighting during
night hours and hence concessions were offered to houlse-hold to use electricity
during day hours in domestic tariffs.
|
 |
Today
the scene has changed, a modern household has Air Conditioner, Geyser,
Refrigerator, Vacuum Cleaner, Oven, Washing Machine, Kitchen Machine, Hair
Drier etc. The combined connected load of the above appliances works
out to be about 10 KW (14 H.P). A modern office has connected load of 5
kW per 100 Sq.Ft. of area. This concentraton of load has increased the
risk of fire due to short circuit. Today 90% of the fires are
atributed to electric short circuit and hence due care should be taken
in selection and installation of electric cables.
PVC is a widely accepted insulating material for building wires due to
its better abrasive and chemical resistance, weatherproof, electrical and
fire retardant properties.
We
have enhanced the fire retardant properties of PVC by adding special additives
in its formulation to meet the demand.
Flame
retardant properties of insulating materials is measured by its Oxygen
Index. Oxygen Index indicates the concentration of Oxygen required
in Air so that the material will burn like a candle. The Oxygen Index
of normal PVC is about 25% while that of out FIRE BRAKE PVC is 30% . Apart
from theis our PVC emits less smoke and HCL contents in the smoke is also
less and hence fire fighting becomes easier.
|
|
3. Flexible
Cables
 |
POLYCAB
Brand, PVC insulated L.T. Light Duty Cables are as per IS:694-1990 and
are suitable for fixed wiring and flexible operation.
The
cables are suitable for use on AC single phase or three phase (earthed
or unearthed) system for rated voltage up to and including 1100 volts.
These cables can be used on DC systems for rated voltage up to and
including 1500 Volts to earth. |
|
4. Power Control Cables

|
LT Heavy Duty Cables
- POLYCAB brand, PVC insulated LT heavy duty cables are as per IS-1554
(Part I) 1988 and are suitable for fixed installations. The Cables are
suitable for use on AC single phase or three phase (earthed and unearthed)
systems for rated voltage up to and including 1100 volts. These cables can
be used on DC systems for rate |
5. Instrumentation
cable
 |
Instrumentation
cable annealed tinned copper conductor with PVC insulated type 'C' colour
core number printing will be provided for identification core twisted to
form a pair and the pair will be laid up to form a round symmetrical shape
plain polyster tape and screened by annealed tinned copper wire braided
/ or Aluminium miller tape, with 95% coverage. Innersheath will extruded P.V.C. (ST 1) armour with
G.I. wire 1.0mm. outersheath with P.V.C. |
6. XLPE
 |
LT
Heavy Duty Cables - POLYCAB brand, XLPE insulated LT heavy duty
cables are as per IS-7098 (Part I) and are suitable for fixed installations.
The Cables are suitable for use on AC single phase or three phase (earthed
and unearthed) systems for rated voltage up to and including 1100 volts.
These cables can be used on DC systems for rated voltage up to and including
1500 volts to earth. |
|